Service Guide

Hazardous Materials (FedEx Ground): How to Ship

Get an overview of hazardous materials shipping information, learn how to ship batteries, see how to qualify to ship hazardous materials, and learn details on services and restrictions.

Shipping dangerous goods via FedEx Express? Start here.

View the FedEx Service Guide PDF

  • how to ship hazardous materials, FedEx

Share

How to ship hazardous materials

Start here to learn everything you need to know about shipping hazardous materials via FedEx Ground. Learn how to qualify to ship, plus get information about services and restrictions, accepted and prohibited materials, and more. For added confidence, use a FedEx® DG Ready solution to generate your shipping papers. Your solution will transmit your information to FedEx to pre-validate your shipment before you offer it to FedEx Ground.

Get other hazardous materials information

Resources

Regulatory updates

How to qualify: get approved to ship hazardous materials with FedEx Ground

Show More

How to qualify: becoming approved to ship hazardous materials with FedEx Ground

In order to ship hazardous materials via FedEx Ground, you first must complete an approval process. Start by contacting your FedEx account executive, who can assist you through this process. Or call FedEx Customer Service at 1.800.GoFedEx 1.800.463.3339 (say "hazardous materials").

Battery shipments

Show More

Battery shipments

Most batteries and equipment containing batteries are regulated in some way when shipped via highway transport. Shippers should refer to the most current U.S. Department of Transportation (DOT) regulations to ensure compliance with marking, packaging and labeling requirements.

Anytime a battery is shipped, the terminals must be protected against short-circuiting, and must be completely covered. In addition, batteries must be individually packaged in nonconductive materials. Ensure there is no movement of the battery within the packaging, and that no contact with metal objects is possible.

FedEx Ground does not accept damaged batteries or defective batteries that pose a safety risk.

Special regulations apply to lithium-battery shipments. Refer to 49 CFR 173.185 and 49 CFR 172.102.

Effective Feb. 6, 2015, smaller-sized lithium batteries that formerly had only packaging requirements now also have marking and documentation requirements as well. Refer to 49 CFR 173.185(c) for details, including size limitations (U.S. domestic ground shipping limits are generally up to 300 watt hours for lithium ion batteries, and up to 25 grams lithium metal per battery for lithium metal batteries). Markings and documentation must include:

  • An indication that the package contains “lithium metal” or “lithium ion” cells or batteries, as appropriate;
  • An indication that the package is to be handled with care and that a flammable hazard exists if the package is damaged;
  • An indication that special procedures must be followed in the event the package is damaged, including inspection and repacking if necessary;
  • A telephone number for additional information;
  • (Lithium metal batteries only) A statement that the package should not be loaded onto passenger aircraft.

All lithium batteries must have successfully passed UN safety testing and be packaged in a manner that prevents short circuits and other damage that could lead to failure. Larger-sized lithium batteries are fully regulated Class 9 hazardous materials. Due to the complex nature of shipping lithium batteries, it is strongly recommended that shippers take a specific lithium battery transportation course in addition to general hazardous material training.

Please refer to 49 CFR 173.185 for details.

Additional restrictions may apply for FedEx Ground lithium-battery shipments between the contiguous U.S. and Alaska and Hawaii.

For more information, call 1.800.GoFedEx 1.800 463.3339 and say "hazardous materials" to reach the Dangerous Goods/Hazardous Materials Hotline.

Services and restrictions

Show More

Services and restrictions

For complete information on shipping hazardous materials via FedEx Ground, see the FedEx Ground Hazardous Materials Shipping Guide.

  • All hazardous materials shipments must be properly packaged and prepared under Title 49 Code of Federal Regulations (49 CFR). We do not accept hazardous materials prepared under International Air Transport Association (IATA) or International Civil Aviation Organization (ICAO) regulations.
  • If you're submitting packages under a U.S. Department of Transportation (DOT) special permit, you must provide a copy of the special permit paperwork to the FedEx Ground facility accepting your shipment.
  • You must be prepared to provide a copy of the Material Safety Data Sheet (MSDS) for your materials upon our request.

Note: This information is provided to FedEx Ground as a tool and should be used in conjunction with and in addition to the requirements of state and federal governments. Customers are responsible for ensuring their shipments comply with all applicable state and federal regulations. Learn more about shipping dangerous goods via FedEx Express.

Service Restrictions

  • Before you can begin shipping hazardous materials via FedEx Ground, you first must be approved (see How to Qualify). Contact your FedEx account executive or call FedEx Customer Service at 1.800.GoFedEx 1.800.463.3339 (say "hazardous materials") for more information.
  • We ship hazardous materials, including ORM-D and Limited Quantity materials, via FedEx Ground® service within the contiguous U.S. Hazardous materials, including ORM-D and Limited Quantity materials, cannot be shipped to, from or within Alaska or Hawaii. Consumer-commodity ORM-Ds and Limited Quantity can be shipped to Canada. You cannot, however, ship ammunition, cartridge small arms and cartridge power devices to Canada.
  • FedEx Ground® Call Tag service is not available for hazardous materials shipments.
  • Our money-back guarantee may not apply to shipments that are not properly prepared in accordance with DOT regulations and FedEx Ground requirements.
  • Hazardous materials, including ORM-Ds, Limited Quantity materials and dry ice, are not accepted at FedEx Office® Print and Ship Centers, FedEx Ship Center® locations, FedEx Office® Ship Centers, FedEx Authorized ShipCenter® locations, FedEx Express® Drop Boxes or unstaffed FedEx locations. Shipments containing hazardous materials, including ORM-Ds, Limited Quantity materials and dry ice, must be tendered to FedEx Ground via a scheduled pickup at the customer location. FedEx Office Print and Ship Centers will accept shipments containing lithium batteries shipped according to 49 CFR 173.185. See FedEx services available to ship dangerous goods for information on dropping off FedEx Express shipments that contain lithium batteries (look under Restrictions).
  • Packages containing hazardous materials cannot exceed 70 lbs. The maximum volume is 8 gallons.

Hazardous Materials, ORM-D and Dry Ice

Service is available from U.S. origins only (all states except Alaska and Hawaii).

Commodity Destination
Contiguous U.S. Alaska and Hawaii Canada
Hazardous Materials Yes No No
ORM-D and Limited Quantity Yes No Yes1
Dry Ice Yes No Yes2


1Call 1.800.GoFedEx 1.800.463.3339 and say "hazardous materials" to confirm availability in advance.
2You can ship dry ice to Canada if your shipment meets the following three conditions:

  1. The dry ice is used as a refrigerant in a small container with a capacity of 450 liters or less.
  2. You indicate "Dry ice as refrigerant" on the documentation accompanying the container.
  3. The container is designed and constructed to permit the release of carbon dioxide, to prevent a build-up of pressure that could rupture the container.

Materials Restrictions
We do not accept for delivery:

  • Hazardous waste, including, but not limited to, used hypodermic needles or syringes transported for sterilization, recycling, disposal or for any other purpose, or other medical waste
  • Hazardous substances in reportable quantities
  • Infectious or non-infectious human or animal cells, tissue, bodily fluids, blood, blood products, plasma, or any other material derived from human or animal blood whether in liquid or solid form
  • Biohazards
  • Regulated or non-regulated diagnostic cultures, specimens or samples, whether infectious or non-infectious
  • Used health care products as defined in Title 49 of the Code of Federal Regulations
  • Any materials regulated as UN 2814, UN 2900, UN 3373 and UN 3291
  • Damaged or defective batteries
  • Material marked as an "inhalation hazard"
  • Fireworks
  • Human corpses, cremated or disinterred human remains, and animal carcasses


Refer to column 9 of the FedEx Ground Hazardous Materials Table for additional restrictions and requirements.

Hazardous Materials Security

Due to a change in the federal regulations governing hazardous materials (HM-232), shippers and carriers are required to develop and implement a security plan addressing risks related to the transportation of hazardous materials. We have such a plan in place and are in full compliance with this regulation, along with the security-training requirements specified in 49 CFR 172.704.

Note: Due to the sensitive nature of this information, we cannot make a copy of our security plan available.

Accepted and prohibited materials

Show More

Accepted hazardous materials

FedEx Ground accepts certain classes and divisions of hazardous materials for transport. Before you ship, please refer to the following list to ensure your packages contain accepted hazardous materials.

Accepted Hazardous Materials

CLASS NAME LABEL CODE/LABEL
1.41 Explosives 1.4/Explosive 1.4
1.6 Explosives 1.6/Explosive 1.6
2.1 Flammable Gas 2.1/Flammable Gas
2.2 Non-Flammable Gas 2.2/Non-Flammable Gas
3 Flammable Liquid 3/Flammable Liquid
4.1 Flammable Solid 4.1/Flammable Solid
5.1 Oxidizer 5.1/Oxidizer
5.2 Organic Peroxide 5.2/Organic Peroxide
7 Radioactive Material I 7/Radioactive White I
8 Corrosive Material 8/Corrosive
9 Miscellaneous Hazardous Materials 9/Class 9
ORM-D2 Consumer Commodity (ORM-D) ORM-D/Consumer Commodity
ORM-D2 Cartridges, Small Arms (ORM-D) ORM-D/Cartridges, Small Arms


1Except fireworks.
2FedEx Ground also accepts Limited Quantity materials.


Important: Based on the nature of the material or U.S. Department of Transportation (DOT) shipping regulations, FedEx Ground may not accept certain "accepted" hazardous materials. Always refer to column 9 of the FedEx Ground Hazardous Materials Table for additional restrictions and requirements.

Prohibited hazardous materials

Prohibited Hazardous Materials

CLASS NAME LABEL CODE/LABEL
1.1 Explosives 1.1/Explosive 1.1
1.2 Explosives 1.2/Explosive 1.2
1.3 Explosives 1.3/Explosive 1.3
1.5 Explosives 1.5/Explosive 1.5
2.3 Poisonous Gas 2.3/Poisonous Gas
4.2 Spontaneously Combustible Material 4.2/Spontaneously Combustible
4.31 Dangerous When Wet 4.3/Dangerous When Wet
6.1 Poisonous Materials (Inhalation Hazards) 6.1/Poison
6.11 Poisonous Materials (Non-Inhalation Hazards) 6.1/Poison
6.2 Infectious Substance 6.2/Infectious Substance
7 Radioactive Material II and III 7/Radioactive Yellow II & III


1We will handle these materials only when packaged in special exemption packaging or when packaged in accordance with DOT exception 49 CFR 173.13, which does not require DOT diamond-shaped hazard labels.

Prohibited hazardous materials: Alaska and Hawaii

Hazardous materials cannot be shipped to, from or within Alaska or Hawaii via FedEx Ground.

This includes shipments containing or marked as ORM-D, Limited Quantity materials and combustible liquids. Examples of these materials include, but are not limited to:

  • Aerosol sprays
  • Nail polish
  • Paints

Learn more about ORM-D, Limited Quantity and combustible liquid shipments, including alternatives for shipping these materials to Alaska and Hawaii via other FedEx® services.

Marking and labeling

Show More

Marking guidelines

All packages must be properly marked in accordance with Title 49 Code of Federal Regulations (49 CFR) requirements. We require all packages to have a minimum of four package markings:

  1. Shipper’s address
  2. Recipient’s address
  3. Proper shipping name as designated by the U.S. Department of Transportation (DOT)
  4. The UN/NA Identification Number


Depending on the contents of your shipment, additional markings may be required:

  • For certain types of explosives and safety devices (formerly classified as airbag modules, airbag inflators and seat belt pretensioners), you are required to provide EX numbers, national stock numbers or product codes in accordance with 49CFR 173.320 on your packaging and/or shipping forms. List the EX numbers, national stock numbers or product codes in the Type DOT Label(s) Required, Ltd. Qty. or Special Permit field of the OP-900LL or OP-900LG, and the Hazardous Materials Certification.
  • The DOT allows certain types of hazardous materials to be transported under a special permit. The special permit number must be marked legibly on the outside of your packaging ("DOT-SP-9168," for example), and in the Type DOT Label(s) Required, Ltd. Qty. or Special Permit field of the OP-900LL or OP-900LG, and the Hazardous Materials Certification.
  • When shipping hazardous materials under exception 49 CFR 173.13, mark “This package conforms to 49 CFR 173.13” on your packaging and in the Type DOT Label(s) Required, Ltd. Qty. or Special Permit field of the OP-900LL or OP-900LG, and the Hazardous Materials Certification.
  • A United Nations Performance Oriented Packaging (UN POP) code is embossed on the outside of specification packaging. These codes vary depending on the type of packaging and its performance level (see Packaging for further details). The UN POP markings (example: UN 4G/X12/S/99/USA/M123) must be permanently marked on the outer package and should never be covered or obstructed by labels or other information.
  • When overpacking (using an outer package), you must mark "overpack" on the outer package. This can be handwritten or affixed by label on the packaging.
  • All lighters or lighter refills identified as UN 1057 must have the appropriate "LAA" number marked on the packaging, OP-900LL or OP-900LG, and the Hazardous Materials Certification.


Packages containing ORM-D materials must be marked on at least one side immediately following or below the proper shipping name: Consumer commodity, or cartridges, power device, for example. The ORM-D designation may be handwritten or affixed by label on the packaging, and must be placed within a rectangle that is approximately 6.3 mm (0.25 inches) larger than the ORM-D designation on each side. It is important to note that the ORM-D marking is your certification that the material is properly described, classed, packaged, marked and labeled (when appropriate), and in proper condition for transportation under 49 CFR.

All liquid hazardous materials and Class 7 Radioactive must be legibly marked, with package orientation arrows on two opposite, vertical sides of the package (hand-drawn or printed on a label). Your markings must conform pictorially to ISO Standard 780-1985: two upward arrows with a line underneath, enclosed within a rectangle (the rectangular border is optional).

Labeling guidelines

Packages containing hazardous materials must be properly labeled. The diamond-shaped hazard label, which indicates the hazard class and division of the material you’re shipping, is the most commonly used label. It must be displayed on packaging of contrasting color.

Some hazardous materials present more than one hazard. When shipping these materials, the subsidiary hazard label must be displayed within 6 inches of the primary hazard label on your packaging.

Exceptions to labeling:

  • Packages shipped as a Limited Quantity may be exempt from the labeling requirements.
  • Packages shipped under a DOT special permit may also be exempt from labeling requirements.
  • Packages prepared under 49 CFR 173.13 do not require a diamond-shaped hazard label.

Packaging

Show More

Overview

All hazardous materials must be packaged in United Nations Performance Oriented Packaging (UN POP) except when non-specification packaging is authorized by Title 49 Code of Federal Regulations (49 CFR). All packaging must meet the requirements set out in 49 CFR 173.24 and 49 CFR 173.24a. Packaging that is not in new or "like new" condition will not be accepted. In addition, the following requirements apply:

  • Fiberboard non-specification packaging and outer packaging must meet the following requirements:
    • For packages weighing up to 20 lbs., the minimum requirements are a 200-lb. bursting test or 32-edge crush test package.
    • For packages weighing 21-50 lbs., the minimum requirements are a 250-lb. bursting test or 44-edge crush test package.
    • For packages weighing 51-70 lbs., the minimum requirements are a 275-lb. bursting test or 55-edge crush test package.
  • All containers with friction-fitted lids must have a retaining ring around the lid, or:
    • Six lid clips (for gallon containers)
    • Five lid clips (for quart containers)
    • Four lid clips (for pint containers)
  • Hazardous materials cannot be shipped in FedEx® packaging.
  • When required, all Class 2 cylinders must be placed inside an overpack (outer package) marked either "Overpack" or, if required by 49 CFR 173.301, “Inside packages comply with prescribed specifications.”
  • Hazardous materials cannot be banded, strapped or taped to form a bundle.
  • FedEx Ground does not accept pails or drums more than 8 gallons (32 liters). All pails or drums must be UN POP. We will accept authorized pails or drums as single packaging.
  • We will accept up to three different compatible hazardous materials inside one UN POP specification package OR in an overpack containing the required UN POP specification package. The materials must be packaged separately then placed in one outer package.
  • We do not accept cryogenic liquids unless properly prepared and packaged under exception 49 CFR 173.320. FedEx Ground does not accept flammable (Class 2.1) cryogenic liquids.
  • FedEx Ground does not accept radioactive fissile material unless properly prepared and packaged under exception 49 CFR 173.453.
  • Combination packaging containing hazardous materials cannot exceed the inner-container requirements. The maximum size, number and total weight of glass, plastic or metal inner containers allowed in any one package are listed below:

    Type of Container Max. Unit Size Max. Number of Units Max. Volume per Carton Max. Net Weight per Package
    Glass 1/2 liter 121 3 liters (12 pints) Net 25 lbs.
      1 liter (1 quart) 6 6 liters (6 quarts) Net 25 lbs.
      2 liters (1/2 gallon) 4 8 liters (2 gallons) Net 25 lbs.
      4 liters (1 gallon) 2 8 liters (2 gallons) Net 25 lbs.
    Plastic 8 liters (2 gallons) 41 16 liters (2 gallons) Net 50 lbs.
    Metal 4 liters (1 gallon) 41 16 liters (4 gallons) Net 50 lbs.

    1For glass unit sizes of less than 1/2 liter (1 pint), and plastic or metal unit sizes of less than 4 liters (1 gallon), the combination packaging cannot exceed the maximum volume or weight per inner carton or inner package.

Examples of completed packaging

All packages must have a properly prepared hazardous materials shipping form OP-900LL or OP-900LG attached on the top of the outer package next to the address label, and must include “To” (recipient) and “From” (shipper) addresses. The following illustrations are for information purposes only.


Example No. 1: Flammable Liquid (Class 3)


Flammable liquid example


Example No. 2: Toxic (Class 6.1)


Option 1: DOT Special Permit                                     Option 2: 49 CFR 173.13

Toxic Class 6.1 examples

Note: For either option, you do not need to affix the DOT diamond-shaped hazard label.


Example No. 3: Flammable Gas (Class 2.1)

Flammable gas example

Note: All Class 2 materials (except Lighters, UN 1057) must be properly overpacked (packed inside an outer container).


Example No. 4: Authorized Single Packaging

Option 1: Overpacked (49 CFR 173.25)                             Option 2: Single (Stand-alone)

Authorized single packaging examples


Example No. 5: ORM-D Shipments


ORM-D shipments

Notes:

  • ORM-D and Limited Quantity shipments do not require hazardous materials shipping form OP-900LL or OP-900LG, or the Hazardous Materials Certification.
  • All outer non-specification packaging (e.g., overpacks and packaging for ORM-D and Limited Quantity shipments) must display a Minimum 200 lb. Burst Strength Test seal or 32-Edge Crush Test (ECT) seal.



Example No. 6: Limited Quantity Shipments Without Shipping Papers

Limited quantity shipments without shipping papers

Note: FedEx Ground will only accept this marking when you are shipping limited quantities without shipping papers.

Ready to ship?

Ship now

Terms and conditions

Review

  • Learn how DG Ready works